Get a quote
A long mown lawn between clipped hedges and trees

Commercial Grounds Maintenance

A commercial grounds maintenance contract pays a firm to keep your outside space tidy and safe on a set schedule. As a rough guide, our calculator puts a medium office site with lawns, beds and hedges on 20 visits at £1,950 to £6,250 a year, and one council published about £10,547 a year for its own specification.

Get a quote

Is this the right page for you?

  • You manage offices, a business park, retail, a care home or a residential estate.
  • You want one firm on a fixed schedule rather than calling someone when the grass gets long.
  • You need paperwork: a specification, risk assessments, waste notes and insurance.
Work out a yearly budget
SiteVisitsOur budget guide
Small care home, grass and litter only12 a year£400 to £1,200
Medium office, lawns, beds, hedges20 a year£1,950 to £6,250
Large business park, full scope26 a year£4,950 to £15,850

From our cost calculator: our own estimate of hours, priced at £25 to £40 a person-hour. A guide, not a quote.

What a contract normally covers

Most people picture a mower. In practice the grass is often the quickest part of a visit, and the rest is what takes the time.

  • Grass: cutting, strimming the edges and clearing clippings off paths.
  • Shrub beds: weeding, pruning and topping up mulch.
  • Hedges: usually one or two cuts a year, timed around nesting birds.
  • Litter and leaves: picks on each visit, plus autumn leaf clearance.
  • Hard surfaces: weed control on paving, kerbs and car park edges.

Tree work, gritting and planting changes are usually priced separately, so ask for them as named extras rather than assuming they are in.

How the price is built

Contractors price time. They estimate how many person-hours each visit takes, multiply by the number of visits, and add a charge rate that covers wages, vans, kit, insurance and margin. Bath and North East Somerset Council's published service agreement shows the pattern clearly: hourly rates of £18.55 for a team leader and £14.46 for an operative in 2016/17, adding up to about £10,547 a year for its specification.

Wages have moved a long way since then. The National Living Wage was £7.20 in April 2016 and is £12.71 from April 2026, so we use £25 to £40 a person-hour in our calculator. That rate is our own estimate, not a published figure.

Plan the year, not just the visit

Your specification should say when each task happens. Grass usually runs from spring to autumn. Leaf clearance follows in late autumn. Hedges need more thought.

If a hedge is on or next to farmland in England, it can't be cut from 1 March to 31 August under the Management of Hedgerows (England) Regulations 2024, with some exceptions. On an office or business park that rule may not apply, but damaging an active nest is an offence at any time under the Wildlife and Countryside Act 1981.

JFMAMJJASONDGrass cutting (typical season)No cutting: hedges by farmland (England)Active bird nests protectedLeaf clearance (typical)Gritting and snow (typical)
Hedge dates: Management of Hedgerows (England) Regulations 2024. Nests: Wildlife and Countryside Act 1981, section 1. Grass, leaf and gritting bands are typical patterns, not rules, and shift with the weather.

Green waste and spraying

Clippings and prunings are waste in law. Under the duty of care in section 34 of the Environmental Protection Act 1990, your contractor should be a registered waste carrier and give you a waste transfer note when they take it away. Keep those notes with your contract file.

Weed control is the other job with rules attached. Anyone spraying a professional product needs a certificate of competence under the Plant Protection Products (Sustainable Use) Regulations 2012. Our post on PA1 and PA6 certificates explains what to ask for.

Writing a specification firms can price

The quickest way to get prices you can compare is to send every firm the same sheet. It doesn't need to be long.

  • A site plan with grass, beds, hedges and hard areas marked.
  • Frequencies for each task, or a request for the firm to propose them.
  • Access: working hours, parking, keys and anything near entrances.
  • Extras you want priced apart, like gritting or tree work.

This is also where you find out who has actually walked the site. A firm that asks about the awkward bank behind the bins has.

From enquiry to first visit

  1. Gather the basics

    Postcode, rough size and what needs doing. A plan or old specification helps.

  2. Firm visits

    A contractor walks the site or reads your specification and asks about access.

  3. Written price

    The firm prices each task and visit in writing, with extras listed apart.

  4. Start the schedule

    Visits begin on the agreed dates, usually with a review after the first season.

Have a site plan or an old specification? Send it with your enquiry.

Get a quote

Grounds contract questions

How long are grounds maintenance contracts?

It varies. Private sites often run a year at a time. Public bodies tend to tender longer terms: one government estate opportunity on Contracts Finder was a four-year fixed term.

Is it cheaper to pay per visit?

Sometimes on a tiny site, but you lose control of timing. A contract fixes the visits through the growing season, when demand on crews is highest.

Should the price include hedges?

Ask for hedges as their own line, with the number of cuts and the months. That way you can see the cost and check the timing against nesting birds.

Who is responsible for trees?

The owner, usually. Pruning a tree with a Tree Preservation Order, or in a conservation area, needs the council's consent or six weeks' notice first (GOV.UK).

What if the contractor misses a visit?

Write it into the contract: how a missed visit is made up, and how you report problems. A short monthly sign-off sheet keeps both sides honest.

Sources behind this page

Ask for a grounds quote

We find a commercial landscaper who covers your site and give you their name before any of your details go to them. It costs you nothing.

  1. You tell us about the site.
  2. We name a contractor who covers it.
  3. You decide if they get your details.

Step 1 of 3

Site location
Get a quote